Color Mixer changes the hue, the saturation and the luminance of eight ranges of color, the Color Mixer section of Dark Room (All) in a panel of its own.

Categories
  • Image Adjustments
Keywords
  • color mixer
  • hsl
  • hue
  • saturation
  • luminance
  • color ranges
  • dark room
  • image adjustments

1Introduction

The process is the Color Mixer section of Dark Room (All) on its own: it runs the same engine with every other control at no change, so its result is exactly what Dark Room (All) gives with the same settings and the rest at their defaults. With every control at its default the image comes out exactly as it went in.

Figure: the Color Mixer panel, with the histogram and the controls.

2Quick Start

  1. Open a stretched image and choose Process > Image Adjustments > Color Mixer.
  2. Move the Saturation slider of the range to change, Blue Saturation for the blue of a reflection nebula, say.
  3. Turn on the live preview (the eye) to see the change on the image.
  4. Click Apply. The result is one history step that Undo takes back.

3Interface & Parameters

The histogram of the image as the controls would make it is at the top, in red, green, blue and the luminance, and the controls follow it.

Eight ranges of color: red, orange, yellow, green, aqua, blue, purple and magenta, centered on those hues, with soft edges, so a color between two ranges is moved by both. Grays are not moved, however strong the sliders are.

Red Hue: From -100 to 100. Turns the colors of the red range toward the next color on either side, up to 30 degrees.

Orange Hue: From -100 to 100. Turns the colors of the orange range toward the next color on either side, up to 30 degrees.

Yellow Hue: From -100 to 100. Turns the colors of the yellow range toward the next color on either side, up to 30 degrees.

Green Hue: From -100 to 100. Turns the colors of the green range toward the next color on either side, up to 30 degrees.

Aqua Hue: From -100 to 100. Turns the colors of the aqua range toward the next color on either side, up to 30 degrees.

Blue Hue: From -100 to 100. Turns the colors of the blue range toward the next color on either side, up to 30 degrees.

Purple Hue: From -100 to 100. Turns the colors of the purple range toward the next color on either side, up to 30 degrees.

Magenta Hue: From -100 to 100. Turns the colors of the magenta range toward the next color on either side, up to 30 degrees.

Red Saturation: From -100 to 100. Changes the saturation of the colors of the red range.

Orange Saturation: From -100 to 100. Changes the saturation of the colors of the orange range.

Yellow Saturation: From -100 to 100. Changes the saturation of the colors of the yellow range.

Green Saturation: From -100 to 100. Changes the saturation of the colors of the green range.

Aqua Saturation: From -100 to 100. Changes the saturation of the colors of the aqua range.

Blue Saturation: From -100 to 100. Changes the saturation of the colors of the blue range.

Purple Saturation: From -100 to 100. Changes the saturation of the colors of the purple range.

Magenta Saturation: From -100 to 100. Changes the saturation of the colors of the magenta range.

Red Luminance: From -100 to 100. Brightens or darkens the colors of the red range. With the Black & White profile it is how much of this color goes into the gray.

Orange Luminance: From -100 to 100. Brightens or darkens the colors of the orange range. With the Black & White profile it is how much of this color goes into the gray.

Yellow Luminance: From -100 to 100. Brightens or darkens the colors of the yellow range. With the Black & White profile it is how much of this color goes into the gray.

Green Luminance: From -100 to 100. Brightens or darkens the colors of the green range. With the Black & White profile it is how much of this color goes into the gray.

Aqua Luminance: From -100 to 100. Brightens or darkens the colors of the aqua range. With the Black & White profile it is how much of this color goes into the gray.

Blue Luminance: From -100 to 100. Brightens or darkens the colors of the blue range. With the Black & White profile it is how much of this color goes into the gray.

Purple Luminance: From -100 to 100. Brightens or darkens the colors of the purple range. With the Black & White profile it is how much of this color goes into the gray.

Magenta Luminance: From -100 to 100. Brightens or darkens the colors of the magenta range. With the Black & White profile it is how much of this color goes into the gray.

3.1Apply, Preview and Instance

The live preview (the eye at the end of the Applies to row) shows the result on the part of the image in view, as Dark Room (All) does. What the whole image decides is measured once on the whole image, so the preview of a part is what Apply gives there. Apply makes one history step that Undo takes back. Instance shows the process as text, a DSPX process (.dsproc), to copy or save; the settings have the ids they have in Dark Room (All), so their values mean the same in both. The process is our own and has no PixInsight icon.

4Usage Tips and Tricks

Stretch first. The controls are made for the values of a stretched image.

One range at a time. The ranges have soft edges, so a color between two is moved by both.

Black and white. The Luminance sliders also mix the gray of the Black & White profile, which is in Dark Room (All).

Dark Room (All): every section in one panel, with the Black & White profile.

Point Color: one color picked from the image.

Saturation: a saturation curve over the hue.